JKBMS Function Customization Guide: Standard Versions vs. Made-to-Order Functions
Estimated reading time: 3 minutes
Compartir
The Find your BMS selector lets you filter by communication protocol and functions. Only the default versions listed below are standard products. Any other function combination requires customization and is made to order.
Standard versions and their default functions
All JKBMS protection boards include a display port and NTC temperature sensor interfaces as standard. B/BD and PD boards come with 2-way NTC by default; 4-way NTC requires customization. PB/PBD boards come with 4-way NTC as standard.
B / BD series
- Standard: Bluetooth + display port + 2-way NTC
- HC: Bluetooth + display port + 2-way NTC + CAN + Heating
- HCRPB (highest version): Bluetooth + display port + 2-way NTC + CAN + RS485 + Heating + Parallel Module Interface + Buzzer
PD models (simplified version)
- Default: Bluetooth + display port + 2-way NTC
- RS485, CAN, parallel, alarm, heating, ACC and one-wire are optional and require customization.
PB / PBD series (inverter BMS)
- Default: display port, CAN, RS485, heating, parallel, alarm, buzzer and 4-way NTC.
- ACC is not a default function on PB/PBD. If you need it, please contact us.
- PBD has the same functions with 0.6A balancing current.
- Series connection is not available for PB boards.
Active balancers
- JK-DZ11B2A24S: RS485 as standard. JK-DZ08B2A24S: CAN as standard.
- Other balancers (JK-B2A8S, JK-B2A16S, JK-B4A24S, JK-B5A24S, JK-B15A24S) have no communication as standard. RS485 or CAN (one of the two) is available as a separate custom order.
- 24S balancers support cascading for packs above 24S.
What requires customization
- Any function that is not part of the default version of the model you choose, for example adding RS485 to an HC board or adding CAN to a PD model.
- 4-way NTC on B/BD and PD boards (2-way NTC is standard).
- ACC: not a default function. Contact us if your project needs it.
- Series connection of multiple BMS units: custom order only, limited to 8S protection boards (12V system up to 6 units, 24V system up to 3 units). See How to Choose the Right BMS.
- Feature combinations the selector cannot match. In this case the selector shows the standard version with a Customize button and the price shows Made to order.
How to request a custom version
- Select your product type, battery chemistry, number of strings and current in the selector.
- Tick the functions you need, then click Customize on the suggested model.
- Send us the model, battery strings, continuous current and required functions via WhatsApp or service@jkbms-ess.com.
- We confirm feasibility, price and lead time for your order before production.
Before you order
Interfaces and functions depend on the exact model and hardware version. Check the B & BD Series Interface Guide, the Inverter BMS Interface Guide and the manuals in our Download Center. For matching displays, cables and modules, see the Accessory Selection Guide.