JKBMS Parallel Module for Multi-Battery Hard Parallel Connection

JKBMS Parallel Module for Hard Parallel Battery Systems

The JKBMS Parallel Module is a hardware accessory for hard parallel connection in compatible JKBMS battery systems. Before ordering, confirm that your exact BMS model has the required hardware parallel interface.

Compatibility

• For compatible HCRPB Smart BMS models equipped with the matching hardware parallel interface. Confirm the exact model, hardware version and connector against its manual.
• Not for Standard or HC models without the required hardware parallel interface.
• The HCRPB Smart BMS designation does not mean the JK-PB Inverter BMS series. Do not assume compatibility from a similar model name.

Hard Parallel vs P-LINK

This module uses a hardware parallel interface. P-LINK is a separate communication-based soft-parallel solution for compatible B/BD HC/HCRPB models; it is not wireless and is not suitable for PB-series Inverter BMS. Confirm the required solution before ordering.

System Planning

The permitted number of battery packs and the required wiring and settings depend on the exact BMS model and system design. Follow the matching manual rather than assuming a universal 32-unit limit or automatic synchronization.

Package Contents

• 1 × Parallel Module

For connection requirements, check the matching manual in our Download Center or contact JKBMS Support with your BMS model and port photos.